3.5 IP Camera Access WAN
IP camera supports WAN access based on PPPoE dial up function..
3.5.1 Dial up with PPPoE
Make sure that the user name and password of PPPoE are set correctly by the client software (refer to
“User Manual of Network Digital Surveillance Software”) as Fig.3-5-1. The camera will try to establish
connection to the network with PPPoE function automatically every time when it is powered on, and get a
dynamic IP address by then.
Fig. 3-5-1 Dial Up with PPPoE
[Notice] Please make sure that the ADSL Modem is powered on .The camera needs to be restarted to
establish the network connection after the configuration of PPPoE parameters for the first time. And
DS-2CD852F do not support this function.
3.5.2 WAN Access
There are two methods to get the access, which are shown as below.
1.
Get a static IP from your ISP for WAN access.
You can open some ports (such as 80 & 8000 ports) in the router which has got static IP from the
ISP, and then connect them to the router. After that you can use the client software to control it. Turn to
22