There are two network cards in the wireless IP camera: cable network card and wireless network card.
The default IP of the cable network card is 192.0.0.64 with 8000 as the default port, admin as the
administrator, and 12345 as the password. The wireless network card’s default IP is 192.168.1.64.
User should configure the parameters of the wireless network card through the cable network
interface. The way of visiting is the same as the chapter 3.2. Enter the menu as “Fig. 3-2-2 preview page”
shows, then click the “Config” option, enter the interface as following:
Fig.3-6-2 Remote Configure parameter
In channel configuration, you can click WIFI configuration button to set WIFI parameter of wireless
camera. SSID should be same as the wireless router. If your wireless router has a security code, please
enable network key and type into the code.
Net configuration in the picture is the wireless NIC IP address, please set it and pay attention that
wireless IP address and IP camera wired IP address should be in different segment.
25