APPENDIX 2 PORT MAP
[Notice] The following setting is about TP-LINK router (TL-R410), which is maybe distinct from
other router’s setting.
1.
Firstly, select the router’s WAN connection Type. As the following Fig. shows:
2.
Set the “network parameter” of the router as the below figure. The setting includes subnet mask and
gateway.
3.
Set the port map in the virtual severs of Forwarding. The following figure gives the illustration. One
camera’s ports are 80 and 8000, and its IP address is 192.168.1.23. The other camera’s ports are 81 and
8001, and IP is 192.168.1.24. Afterwards, enable all or TCP protocols. Enable the port map after
pressing the ‘Save’.
30