English
37
6. Remaining battery indicator (on battary)
You can check the battery’s remaining
capacity by pressing the remaining battery
indicator switch to light the indicator lamp.
(
Fig. 12, Table 5
)
The indicator will shut o
ff
approximately
3 seconds after the remaining battery
indicator switch is pressed.
It is best to use the remaining battery
indicator as a guide since there are slight
di
ff
erences such as ambient temperature and the condition of the battery.
Also, the remaining battery indicator may vary from those equipped to a tool or charger.
Table 5
State of lamp
Battery Remaining Power
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty. Recharge the battery
soonest possible.
Blinks ;
Output suspended due to high temperature. Remove the battery
from the tool and allow it to fully cool down.
Blinks ;
Output suspended due to failure or malfunction. The problem may
be the battery so please contact your dealer.
As the remaining battery indicator shows somewhat di
ff
erently depending on ambient
temperature and battery characteristics, read it as a reference.
NOTE
Do not give a strong shock to the switch panel or break it. It may lead to a trouble.
Fig. 12
Remaining battery
indicator switch
Remaining battery
indicator lamp
Display panel
000Book̲W18DA̲ChS.indb 37
000Book̲W18DA̲ChS.indb 37
2022/03/16 15:47:12
2022/03/16 15:47:12
