English
10
BATTERY REMOVAL / INSTALLATION
1. Battery
removal
Hold the handle tightly and push the battery
latches to remove the battery (see
Fig. 3, 4
).
CAUTION
Never
short
-
circuit the battery.
2. Battery
installation
Insert the battery while observing its polarities
(see
Fig. 4
).
CHARGING
Before using the power tool, charge the
battery as follows.
1. Connect the charger’s power cord to
the receptacle.
When connecting the plug of the
charger to a receptacle, the pilot
lamp will blink in red. (At 1-second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the
charger as shown in
Fig. 5
.
3. Charging
When inserting a battery in the
charger, the pilot lamp will light up
continuously in red.
When the battery becomes fully
recharged, the pilot lamp will blink in red. (At 1-second intervals.) (See
Table 2
)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 2
, according to the condition of
the charger or the battery.
Fig. 3
Ventilation holes
Terminals
Battery cover
Latch
Battery
Fig. 4
Handle
Latch
Battery Pull out
Push
Battery
Pilot lamp
Guide rail
Name plate
Fig. 5
BSL1240M
BSL1215
Battery
00Book̲R12DA̲ChS.indb 10
00Book̲R12DA̲ChS.indb 10
2019/03/07 14:15:39
2019/03/07 14:15:39
