English
55
(3) When charging is completed
○
To verify charge status, check the USB device.
○
Unplug the power cord from the electrical outlet. (
Fig. 17
)
○
Place the rubber cover over the USB port.
Rubber cover
USB cable
USB port
Fig. 17
MAINTENANCE AND INSPECTION
WARNING
○
Be sure to turned o
ff
the switch and pull out the battery.
○
Using cracked, deformed or damaged wheels can lead to wheel breakage and
resulting serious injury.
1. Inspecting the depressed center wheel
Ensure that the depressed center wheel is free of cracks and surface defects.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should
any of the screws be loose, retighten them immediately. Failure to do so could result in
serious hazard.
CAUTION
Using this power tool with loosened screws is extremely dangerous.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the power tool.
Exercise due care to ensure the winding does not become damaged and/or wet with oil or
water.
4. Inspection of terminals (tool and battery)
Check to make sure that swarf and dust have not collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on the terminals.
Failure to do so may result in malfunction.
000Book̲G3610DA̲ChS.indb 55
000Book̲G3610DA̲ChS.indb 55
2021/05/10 12:09:09
2021/05/10 12:09:09
