HIKOKI CV 12DA, Инструкция по эксплуатации

Страница: 9 / 56

9
English
NAMES OF PARTS (Fig. 1 – Fig. 13)
Switch Display panel
LED light
Remaining battery
indicator switch
Attachment ring
Remaining battery
indicator lamp
M6 bolt Retaining hole
Nameplate Attachment ring lug
Handle Blade
Dial Sanding plate
Battery Sanding paper
Latch Dust collection adapter
Hexagonal bar wrench Felt packing
Wrench holder Hose
Pilot lamp
SYMBOLS
WARNING
The following show symbols used for the machine. Be
sure that you understand their meaning before use.
CV12DA: Cordless Multi Tool
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
n
0
No-load speed
/min Oscillation per minute
Oscillation angle, Total (left / right)
kg
Weight*
Switching ON
Switching OFF
Disconnect the battery
Pad
Sanding paper
Blade
Cutsaw
Accessory case
Warning
Prohibited action
* Depending on attached battery. The heaviest weight is
measured with BSL1240M (sold separately).
Battery
Remaining battery indicator switch
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn o ff the LED light, the light goes o ff
automatically in about 3 seconds.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 54.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Flush cutting and pocket cutting of various materials
○ Peeling of tiles, caulking, etc.
○ Polishing wood materials, etc.
SPECIFICATIONS
The speci fi cations of this machine are listed in the Table on
page 54.
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
0000Book̲CV12DA̲Asia.indb 9 0000Book̲CV12DA̲Asia.indb 9 2020/10/09 13:27:07 2020/10/09 13:27:07