HIKOKI CC 14STA, Инструкция по эксплуатации, Страница: 4 / 60

English
4
22. Have your tool repaired by a quali fi ed person.
This electric tool is in accordance with the relevant safety requirements. Repairs
should only be carried out by quali fi ed persons using original spare parts.
Otherwise this may result in considerable danger to the user.
PRECAUTIONS ON USING CUT-OFF MACHINE
1. Inspect the cutting wheel before use, do not use chipped or otherwise defect cutting
wheels. Always make a trial run before use to con fi rm that the Cut-o ff Machine does
not involve abnormalities.
2. Use the normal cut-o ff wheel on its normal working surface.
3. Guard against cut-o ff sparks.
4. Properly replace the cut-o ff wheel.
5. Always pay attention that the cut-o ff wheel clamping parts are never impaired.
Defective parts will cause damage to the cut-o ff wheel.
6. Ensure that the work piece is free of foreign matter such as nails.
7. Use only cutting wheels recommended by the manufacturer which have a marked
speed equal to or greater than the speed marked on the nameplate of the machine.
8. Abrasive wheels shall be stored and handled with care in accordance with
manufacture’s instructions.
9. Ensure that mounted wheel are fi tted in accordance with the manufacture’s
instructions.
10. Do never use the machine without the guard in place.
11. Do not saw blade.
12. Do not use the machine in explosive atmospheres and environment where sparks
could fi re, explosion etc.
OPERATION
CAUTION
◯
It is dangerous to remove or install the workpiece while the cut-o ff wheel turning.
◯
It does not necessarily cut rapidly when putting more force on the handle.
◯
Too much force on the handle will put excessive pressure on the motor and reduce
its capacity.
◯
Do not fail to switch OFF the switch after operation is completed and pull the plug
out.
◯
Never remove or install a workpiece material while the cut-o ff wheel is rotating, to
avoid personal injury.
1. Make sure that the voltage achieves the rating value on the name plate.
000Book_CC14STA_1.indb 4 000Book_CC14STA_1.indb 4 2018/7/25 16:14:52 2018/7/25 16:14:52