HIKOKI C 8FSE, Инструкция по эксплуатации, Страница: 25 / 176

English
25
SPECIFICATIONS
Max. Cutting
Capacity
Height × Width
0°
65 mm × 312 mm
**75 mm × 262 mm with aux. board (30 mm)
Miter 45°
65 mm × 220 mm
**75 mm × 185 mm with aux. board (20 mm)
Bevel
Left 45°
45 mm × 312 mm
**50 mm × 252 mm with aux. board (30 mm)
Right 5°
60 mm × 312 mm
**70 mm × 252 mm with aux. board (30 mm)
Compound
Bevel (Left) 45° + Miter 45°
45 mm × 220 mm
**50 mm × 170 mm with aux. board (30 mm)
Bevel (Right) 5° + Miter 45°
60 mm × 220 mm
**70 mm × 170 mm with aux. board (30 mm)
Saw Blade Dimensions (oD × iD × Thickness) 216 mm × 30 mm × 2 mm
Maximum kerf 2.7 mm
Miter Cutting Angle Right 0° – 57°, Left 0° – 45°
Bevel Cutting Angle Right 0° – 5°, Left 0° – 48°
Compound Cutting Angle
Bevel (Left) 0° – 45°
Miter (Right and Left) 0° – 45°
Bevel (Right) 0° – 5°
Voltage (by areas)*
(110 V, 230 V)
Power Input* 1050 W
No-Load Speed C8FSHE • C8FSE: 5500 min
–1
Machine Dimensions (Width × Depth × Height) 555 mm × 790 mm × 485 mm
Weight (Net)** 16.7 kg (C8FSHE) / 16.4 kg (C8FSE)
Laser Marker
(Only Model C8FSHE)
Maximum output Po<3 mW Class
II
Laser Product
(Iambda) 654 nm
Laser medium Laser Diode
* Be sure to check the nameplate on product as it is subject to change by areas.
When cutting the workpiece which has the dimension of “**” there might be some possibility of the lower end of the circular
saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when cutting the
workpiece. For further details, refer to “PRACTICAL APPLICATIONS”. Mount the auxiliary board on the fence surface (Refer
( ) the thickness of auxiliary board). Refer to “10. Cutting large workpieces” ( Fig. 22, 23 ).
1. Minimum size of the workpiece.
All workpieces that can be clamped left or right from the saw blade with the supplied vise assembly.
Model C8FSHE • C8FSE: 245 × 90mm (length × width)
2. Maximum cutting depth.
Model C8FSHE • C8FSE: 65mm (Miter 0° × Bevel 0°)
** According to EPTA-Procedure 01/2014
○ Side Handle ..................................................................1
○ Sub Fence (mounted on tool) ........................................1
○ Sub table ass'y ..............................................................2
Standard accessories are subject to change without notice.
STANDARD ACCESSORIES
○ 216 mm TCT Saw blade (mounted on tool) ...................1
○ Dust bag .......................................................................1
○ 10 mm Box wrench .......................................................1
○ Vise Assembly ..............................................................1
○ Holder ...........................................................................1
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
00Book̲C8FSHE.indb 25 00Book̲C8FSHE.indb 25 2021/11/11 8:19:06 2021/11/11 8:19:06