26
32
11
32
32
12
26
11
26
12
5
12
5
5
5
12
20
English
Fig. 13a
Fig. 13b
Fig. 13c
Fig. 13d
Fig. 13f
Fig. 13e
WARNING:
Keep your fingers clear of the hinge points while folding the stand. Danger of fingers being crushed or contused.
◌
To fold the stand for moving, return fence rails and lock the fence rails lock lever and return outfeed support to inner position. Store the
accessories securely.
◌
Grasp the stand support assembly (26) and lift it up until two stand legs (11) (located on side of the wheel) leaving off the ground, then
fold in two stand legs (11). To do this, push the lock pins (32) until they unlock the stand legs (11) from the holes, then swing the stand
legs (11) upward until the stand legs are locked with the lock pins (32) engage the holes.
◌
Grasp the handle I (5) and tilt saw back onto wheels until the stand is balanced on the wheels (12) and stand support assembly (26).
(Fig. 13b-13c)
◌
Fold in other two stand legs (11). To do this, push the lock pins (32) until they unlock the stand legs (11) from holes, then swing the
stand legs downward until the stand legs are locked with the lock pins (32) engage the holes.
◌
Grasp the handle I (5) firmly and tilt saw to you, push the saw to the desired location (Fig. 13e) then either open the stand or store the
saw (Fig. 13d & 13f) in a dry environment.
FOLDING THE STAND (Fig. 13a-13f)
