Heat Resistant Bullet Camera · Quick Start Guide
6
socket.
●
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
DO NOT connect multiple devices to one power adapter, to
avoid over-heating or fire hazards caused by overload.
●
DO NOT touch the bare metal contacts of the inlets after the
circuit breaker is turned off. Electricity still exists.
●
+ identifies the positive terminal(s) of equipment which is
used with, or generates direct current. - identifies the
negative terminal(s) of equipment which is used with, or
generates direct current.
Battery
●
CAUTION: Risk of explosion if the battery is replaced by an
incorrect type.
●
Dispose of used batteries according to the instructions.
●
Improper replacement of the battery with an incorrect type
may defeat a safeguard (for example, in the case of some
lithium battery types).
●
Do not dispose of the battery into fire or a hot oven, or
mechanically crush or cut the battery, which may result in an
explosion.
●
Do not leave the battery in an extremely high temperature
surrounding environment, which may result in an explosion
or the leakage of flammable liquid or gas.
●
DO NOT subject the battery to extremely low air pressure,
which may result in an explosion or the leakage of flammable
liquid or gas.
Installation
●
Never place the equipment in an unstable location. The
equipment may fall, causing serious personal injury or death.
●
This equipment is for use only with corresponding brackets.
Use with other (carts, stands, or carriers) may result in
instability causing injury.
System Security
●
You acknowledge that the nature of Internet provides for
inherent security risks, and our company shall not take any
responsibilities for abnormal operation, privacy leakage or
other damages resulting from cyber attack, hacker attack,
however, our company will provide timely technical support
if required.
●
Please enforce the protection for the personal information
and the data security as the device may be confronted with
the network security problems when it is connected to the
Internet. Please contact us when the device might exist
network security risks.
●
Please understand that you have the responsibility to
configure all the passwords and other security settings about
the device, and keep your user name and password.
Maintenance
●
If the product does not work properly, please contact your
dealer or the nearest service center. We shall not assume
any responsibility for problems caused by unauthorized
repair or maintenance.
●
A few device components (e.g., electrolytic capacitor) require
regular replacement. The average lifespan varies, so periodic
checking is recommended. Contact your dealer for details.
●
Wipe the device gently with a clean cloth and a small
quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the device may be
impaired.
●
To reduce the risk of fire, replace only with the same type
and rating of fuse.
●
The serial port of the equipment is used for debugging only.
Using Environment
●
Make sure the running environment meets the requirement
of the device. The operating temperature shall be 0 °C to
200 °C (32 °F to 392 °F),
depending on the installation system
,
and humidity shall be 95% or less.
●
Place the device in a dry and well-ventilated environment.
●
DO NOT expose the device to high electromagnetic radiation
or dusty environments.
●
DO NOT aim the lens at the sun or any other bright light.
●
The equipment shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the equipment.
●
No naked flame sources, such as lighted candles, should be
placed on the equipment.
●
Provide a surge suppressor at the inlet opening of the
equipment under special conditions such as the mountain
top, iron tower, and forest.
●
Burned fingers when handling the parts with symbol
.
Wait one-half hour after switching off before handling the
parts.
Emergency
●
If smoke, odor, or noise arises from the device, immediately
turn off the power, unplug the power cable, and contact the
service center.
COMPLIANCE NOTICE: The thermal series products might be
subject to export controls in various countries or regions,
including without limitation, the United States, European Union,
