46
Critical Array Becomes Disabled When You Removed Faulty Disk
If this is the case, you may have removed the wrong disk. When you remove the wrong disk from a
critical array, the array status may become disabled. Data is inaccessible for disabled arrays. Follow
these steps to restore the array to the previous state.
1.
Shut down your PC
2.
Shut down the your device
3.
Place all disks back to original configuration
4.
Boot up PC
Your array should be back to Critical status. Identify the correct disk and rebuild from there.
Online RAID Roaming
One of the features of all HighPoint RAID controllers is online array roaming. Information about the RAID
configuration is stored on the physical drives. So if a card fails or you wish to switch cards, the RAID
configuration data can still be read by another HighPoint card.
Help
Online Help redirects you to additional documentation concerning the WebGUI.
Register Product takes you to the HighPoint Online Web Support Portal. On this page you can create a
new customer profile where you can register your product, or post an online support ticket
