17
You can then remotely access the WebGUI using any other computer that is in your local network by
opening any web browser and typing
http://{IP
address of host compute}:7402 (default port is 7402)
Formatting the RAID Volumes
After creating a RAID array, your operating system will recognize that array as a logical disk. However,
the array will not be accessible until it is formatted by the operating system.
Format the volume when you have finished the following procedures
1.
Set up the RocketStor 6661A-mSAS1
2.
Install Driver and WebGUI software
3.
Create an Array
For Windows users
1.
Right click the Windows logo on the bottom left of the screen
2.
Select Disk Management
3.
If you just created the array, a prompt will appear after clicking disk management asking you to
initialize the disk
