HighPoint RocketStor 6414TS Скачать руководство пользователя страница 11

Страница: 11 / 67



Note 2

: Refer to your motherboard manual for instructions on how to locate

your PCI Express slot.

Align the RocketRAID 2711 with the PCIe slot and push straight down until card is
fully seated.

Tighten the connection by fastening the RocketRAID bracket and enclosure
together.

A PCI-Express 2.0 x8 card is compatible with PCI-Express 2.0 x16 and PCI-Express 3.0
x16 slots.

Step 2: Install/Update Drivers

Installing Drivers on an Existing Operating System

Drivers provide a way for your operating system to communicate with your new
hardware. Updating to the latest drivers ensures your product has the latest
performance, stability, and compatibility improvements. Drivers are updated regularly
at

www.highpoint-tech.com

For

Windows

Users:

Download the latest driver files from our website

www.highpoint-tech.com >

Support > Documents and Downloads > RocketStor 6414TS.

Extract the downloaded files onto your PC and note the location of the files.

Содержание RocketStor 6414TS




































































Результаты поиска

Содержание RocketStor 6414TS

Отзывы:

HighPoint RocketStor 6414TS, Руководство пользователя, Страница: 11 / 67

Результаты поиска

Содержание RocketStor 6414TS

Отзывы: