HIGHLEAD HLK-03, Инструкция по эксплуатации

Страница: 8 / 62

3
3 INSTALLATION
Caution
★
The machine should be installed by the specialists who have enough experience for the sewing machine
installations
．
★
All the necessary electric wiring should be done by electric engineers who are qualified for the electric
wiring
．
★
If any damage or fault is found on the machine at the installation
，
please do not operate until it is
repaired
．
★
Please do not operate the sewing machine with excessive modifications from the standard specification.
3-1 Installation of the control box
If the control box is purchased without
assembling to the table, the control box has
to be installed underneath the table. Please
install the control box with the instruction in
the paragraph
．
3-2 Installation of the power switch
If the power switch is purchased
without assembling to the table
，
the
power switch has to be attached with
the following procedure
．
(1) Mount the power switch
○
1 with the
wood screw
○
2 underneath the table as
shown on the figure
．
(2) Fix the electric cords with the staples
○
3 underneath the table
．
(3) Hook up the connector
○
8 of the
power switch
○
1 to the control box
○
7
．
(4) Attach the power plug
○
5 to another
end of the power switch cord
○
4
．