HIGHLEAD HLK-03, Инструкция по эксплуатации

Страница: 23 / 62

18
★
When the clamp goes down, the clearance between the pressure plate (NO.1) and the
roller (NO.2) should be adjusted more than 1mm.
(1) Turn the power switch off. And remove two springs
○
3 .
(2) Loosen four setscrews
○
4 .
(3) Put the clamps (right / left)
○
5 down.
(4) Insert the spacer (1~2mm thick)
○
6 into the position between and pressure plate
○
1
and the roller
○
2 , and tighten the setscrews
○
4 securely.
(5) Remove the spacer
○
6 , and set the springs
○
3 .
7-9 Adjustment of the trimmer cam follower
(1) Turn the power switch OFF and remove the top cover
．