24
Press the STORE key to display the Store menu. Use this menu to save the current
P400 configuration. All programmable settings are saved except the run state, which
defaults to stop (no delays generated) at powerup.
Select one of the thirty-one memory locations by turning the spinner knob.
Alternatively, you can select a memory location by entering the location number with
the numeric keypad and pressing the ENTER key.
After selecting a memory location, press the ENTER key to store the configuration.
The P400 will display a wait screen for approximately three seconds as the
configuration is saved.
Erase a stored configuration by selecting the memory location and pressing the
CLR
→
key. The P400 will display a wait screen for approximately three seconds as
the configuration is erased. It is not necessary to erase a memory location before
storing a new configuration. WARNING: The P400 will automatically overwrite the old
menu configuration when STORE is pressed.
USED
UNUSED
0
t o
30
RECALL LOC:
0
USED
ENTER t o RECALL
1
2
3
4
Set by user
Set by P400
Figure 12. Recall Menu
Press the RECALL key to display the Recall menu. Use this menu to recall a
previously saved configuration. All programmable settings are recalled except the run
state, which defaults to stop (no delays generated).
Select one of the thirty-one memory locations by turning the spinner knob.
Alternatively, you can select a memory location by entering the location number with
the numeric keypad and pressing the ENTER key.
After selecting a memory location, press the ENTER key to recall the configuration.
The P400 will display a wait screen for approximately three seconds as the
configuration is recalled, then it will return to the trigger menu.
