background image

1. ATTENTION INSTALLER: This manual contains important information about the

installation, operation and this product's safe use. This information should be given to the

owner or operator of this equipment. Please read this operation manual carefully and keep it

for future reference.

2. WARNING: RISK OF ELECTRICAL SHOCK OF ELECTROCUTION. This underwater light

must be installed by a licensed or certified electrician or a qualified serviceman in accordance

with the requirements of your government standard or local authorities. Improper installation

will create an electrical hazard, which could result in death or serious injury to pool or spa

users, installers, or others due to electrical shock, and may also cause damage to property.

Read and follow the specific instructions below.

3. WARNING: Before installing this underwater light, read and follow all warning notices and

instructions accompanying this light.Failure to follow safety warnings and instructions can

result in severe injury, death, or property damage.

         WARNING

PRODUCT DESCRIPTION

1. IMPORTANT: Pay attention to the detailed specifications on the packages accompanying
this underwater light. Choose corresponding items and methods of operation in accordance
with the specifications.
2. NOTE: This underwater light is designed for use only when fully submerged in fresh water,
connecting with a safety transformer.
3. Only 12 volt or 24 volt low voltage input is suitable for this product, according to its own
specifications. A safety transformer is essential when carrying out the installation of this
product. Failure to do so may result in the the injury, death, and damage of this product.
4. It is recommended to install a light every 20m2, or every 1W (or above) for 1m2. Choose
corresponding lights in according to the approximate exposure area of each light, and match it
with your swimming or spa pool.

PRODUCT APPLICATION:

1. Installed in concrete swimming pools, vinyl/ liner pools, fiberglass pools.
2. Suitable depth range under the water for light installation: 1

5 meter.

3. Maximum water temperature range for light operation: -20

℃~

38

.

1

Содержание HIDRO-NPN300








Отзывы: