Hidea HDF6.8 Скачать руководство пользователя страница 8

Страница: 8 / 52

General information
WARNING

Be sure shift control is in neutral before starting engine.(except 2.5hp)

Do not touch or remove electrical parts when starting or during operation.

Keep hands, hair, and clothes away from flywheel and other rotating parts while engine is

running.

Label

WARNING

This engine is equipped with a neutral starting device.

The engine will not start unless the shift control is in neutral position.

Label

WARNING

LEAKING FUEL COULD CAUSE A FIRE.

Before tilting up the engine or laying it on its side:

• Turn the fuel cock to the “closed” position.

• Tighten the air-vent screw on the fuel tank cap.

Caution labels

Be sure shift control is in neutral

before starting engine.(except 2HP)

Do not touch or remove electrical parts

when starting or during operation.

Keep hands,hair,and clothes away from flywheel

and other rotating parts while engine is running

This engine is equipped with a neutral starting device.

The engine will not start unless the shift control is

in neutral position

Содержание HDF6.8





















































Результаты поиска

Содержание HDF6.8

Отзывы:

Бренды по названию

Популярные бренды

Hidea HDF6.8, Руководство пользователя

Результаты поиска

Содержание HDF6.8

Отзывы:

Бренды по названию

Популярные бренды