manualshive.com logo in svg

Hidea HDF6.8, Руководство пользователя

Поделиться
Скачать
Hidea HDF6.8 Скачать руководство пользователя страница 25

Operations

Forward or reverse

1. Place the throttle grip in the fully closed position.

2. Move the gear shift lever quickly and firmly from neutral to forward or reverse.

WARNING

When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise the boat

could become unstable, which could result in loss of control and an accident.

Stopping engine

Before stopping the engine, first let it cool off for a few minutes at idle or Iow speed. Stopping the

engine immediately after operating at high speed is not recommended.

Procedure

1. Push and hold the engine stop button until the engine comes to a complete stop.

2. After stopping the engine, tighten the air vent screw on the fuel tank cap and set the fuel cock

lever or knob to the closed position, if equipped.

3. Disconnected the fuel line if you are using an external fuel tank.

NOTE

If the outboard motor is equipped with an engine stop switch lanyard, the engine can also be

stopped by pulling the lanyard and removing the lock plate from the engine stop switch.

21

Содержание HDF6.8





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды