HID FARGO DTC 5500LMX, Руководство пользователя

Страница: 63 / 74

May 2017 PLT-02496, Version: 1.2
Page 5-9 Troubleshooting
#346
LAM2 Lamination
Jam
A card has become jammed
under the Laminator LAM2
station.
Open the Laminator lid to clear any cards in the system by
pressing the card forward or backward buttons on the
display. Clean the Laminator card transport rollers. Replace
cleaning rollers that are dirty. Close the Laminator lid. Press
the Resume button on the Printer to continue printing. To
cancel, press the Cancel Print button or the Cancel button
located on the Printer.
#347
LAM1 Laminate
Failed To Release
The LAM1 station was unable to
separate the laminate from the
supply roll.
Open the Laminator lid. Squeeze and lift the gray latches for
the hot roller mechanism to retract the hot roller mechanism
to the service position. Clear any cards in the Laminator by
pressing the card forward or backward buttons on the
display. Clean the Laminator card transport rollers. Replace
cleaning rollers that are dirty. Close the Laminator lid. Press
the Resume button to continue. To cancel, press the Cancel
Print button or the Cancel button on the printer.
#348
LAM2 Laminate
Failed To Release
The LAM2 station was unable to
separate the laminate from the
supply roll.
Open the Laminator lid. Squeeze and lift the gray latches for
the hot roller mechanism to retract the hot roller mechanism
to the service position. Clear any cards in the Laminator by
pressing the card forward or backward buttons on the
display. Clean the Laminator card transport rollers. Replace
cleaning rollers that are dirty. Close the Laminator lid. Press
the Resume button to continue. To cancel, press the Cancel
Print button or the Cancel button on the printer.
#349
Lam Hot Roller
Unable to Warm
The Laminator cannot reach the
desired operating temperature. Cycle power to system. If the error persists, contact Technical
Support.
#350
Lam Hot Roller
Unable to Cool
The Laminator cannot reach the
desired operating temperature. Cycle power to system. If the error persists, contact Technical
Support.
#351
LAM1 Laminate
Low
The laminate at the LAM1 station
is low. The system will continue operating until the LAM1 laminate is
out. Press the Resume on Printer button to continue.
#352
LAM2 Laminate
Low
The laminate at the LAM2 station
is low. The system will continue operating until the LAM1 laminate is
out. Press the Resume on Printer button to continue.
#353
LAM1 Laminate
Out
The laminate at the LAM1 station
is out.
Open the Laminator lid. Follow the instructions on the label
located under the Laminator lid to remove and reinstall a new
LAM1 laminate. Close the Laminator lid to resume.
#354
LAM2 Laminate
Out
The laminate at the LAM2 station
is out.
Open the Laminator lid. Follow the instructions on the label
located under the Laminator lid to remove and reinstall a new
LAM2 laminate. Close the Laminator lid to resume.
#355
LAM1 & LAM2
Laminates Out
The laminate at the LAM1 & LAM2
stations are out.
Open the Laminator lid. Follow the instructions on the label
located under the Laminator lid to remove and reinstall a new
LAM1 and LAM2 laminates. Close the Laminator lid to resume.
Error Message Cause Solution