5. Maintenance
Before continuing, ensure you have completely read and understood this manual’s Safety
section, in addition to the safety information in the section(s) below.
5.1. Maintenance Safety
• Keep components in good condition. Follow the maintenance procedures.
• Ensure the service area is clean, dry, and has sufficient lighting.
• Do not modify any components without written authorization from the manufacturer.
Modification can be dangerous and result in serious injuries.
• Shut down and lock out power before maintaining equipment.
• After maintenance is complete, replace all guards, service doors, and/or covers.
• Use only genuine Grain Saver replacement parts or equivalent. Use of unauthorized
parts will void warranty. If in doubt, contact Grain Saver or your local dealer.
• Before applying pressure to a hydraulic system, make sure all components are tight
and that hoses and couplings are in good condition.
5.2. Maintenance Schedule
Proper maintenance habits mean a longer life, better efficiency, and safer operation. Please follow the
Maintenance Schedule below. Keep good records of the hours the bin unload has been operated and
the maintenance performed.
Daily:
Section 5.3 – Visually Inspect the Equipment
Monthly:
Section 5.4 – Inspect Hydraulic Hoses and Fittings
Annually:
Section 5.5 – Clean and Wash the Equipment
Section 5.6 – Check the Gearbox Oil
As Required:
Section 5.7 – Change the Gearbox Oil
Section 5.8 – Tension the Drive Belts
Section 5.9 – Align the Drive Belts
Section 5.10 – Replace the Drive Belts
Section 5.11 – Replace the Sweep Drive Wheel
Section 5.12 – Adjust the Bin Sweep Backboard
Section 5.13 – Removing the Underfloor Auger Flighting
24