© 1995-2009 Energy Saving Products Ltd.
(5)
Fig. 6
Fig. 7
Changing the UV Lamps
1.
Remove filter as in above.
(Figs. 6, 7)
2.
Remove Photocatalytic module.
(Fig. 8)
3.
Unplug UV lights, loosen retaining screws, and
remove UV lights.
(Figs. 9, 10)
4.
Replace UV lights, re-tension retaining screws,
and replace plug-ins.
5.
Replace Photocatalytic module and filter, secure
door and re-insert plug, check sight ports to ensure lamp
illumination.
Changing the Filter
1.
Unplug the power cord from the HE PS unit.
Unscrew the two locking knobs and remove the door
(Fig. 6)
2.
Remove old filter and replace with new filter.
Make sure airflow arrow on filter is pointing to the inside
of module.
(Fig. 7)
Locking Knobs
Fig. 8
Fig. 9
Unplug UV Lights
Loosen Retaining
Screws
Fig. 10
NOTE! ENSURE FILTER AND
PHOTOCATALYTIC MODULE ARE
INSTALLED IN PROPER AIR FLOW
SEQUENCE.
