QminiH series industrial GIS data collector manual
- 4 -
1.1 Instruction
Welcome to use Hi-Target QminiH Series Industry GIS Data Collector manual. This manual is adapt
to QminiH1/QminiH3/Qnini3P, the manual introduce how to install ,set up and use the Industry GIS Data
Collector.
The QminiH series GIS Data Collector is a new generation GPS/GIS data collector. Hi-Target
suggests you read this manual carefully for your right using even if you used other Industry GIS Data
Collector product. If you do not familiar with Industry GIS Data Collector, please check Hi-Target website:
http
：
//www.zhdgps.com
1.2 Relative Information
You can get the manual from the following: 1, the supplementary CD when purchasing Hi-Target
QminiH series equipment. You can get this manual from folder named Manual; 2, Download from
Hi-Target website, Go to “Download Section” -> “Products Manual” -> “GIS products”.
1.3
Technical Support
Y
ou can find “Technical Support” in Hi-Target website. You can contact our technical center or service
department through the phone showed in the “Service Instruction” .You can also send message to
“Technical Forum” and “Expert Evaluation” .We will reply to your question in time.
1.4 Your Suggestions
If you have any suggestions or comments on the manual, please login Hi-Target website, “Technical
Service” -> “Suggestions & Complaint”,send message to us.Your feedback will improve quality of our
manual greatly.
