Hi-Target HTS-420R Скачать руководство пользователя страница 64

Страница: 64 / 192

Total Station Manual

63 -

○

4 Press [F4](OK) to save

the coordinates of this
point.

[F4]

           [Input Coord.]
Job       :             DEFAULT
Pt.       :
N         :
E         :            15.012 m
Z         :             4.215 m

Back

121

3.102 m

○

Program

prompts"Saved!" Then enter

input

instrument

height

screen. Input the instrument
height and press [ENT] to
confirm. Then press [F4](OK)
to finish the setting.

Input
instrument
height
+
[ENT]
[F4]

[Set STA]

Input I.H!

IH. :

1.400 m

Back

○

Back to Pre-Settings

screen. The setting items

that have been made are
marked with *.

[Surveying]

[*]  F1    Set Job             (1)
[*]  F2    Set STA             (2)
[ ]  F3    Set B.S.            (3)
     F4    Start               (4)

Setting the Orientation

The orientation can be input manually or determined from points that are either

measured orselected from the memory.

3.1

Manual input orientation

Steps

：

Press [F1] and enter manual input screen.

Input the azimuth, prism height and point name.

Press [F1](ALL) to start measuring and set theorientation.

Press [REC] to record theangle and orientation.

Содержание HTS-420R

































































































































































































Результаты поиска

Содержание HTS-420R

Отзывы:

Бренды по названию

Популярные бренды

Hi-Target HTS-420R, Руководство пользователя

Результаты поиска

Содержание HTS-420R

Отзывы:

Бренды по названию

Популярные бренды