Hi-Target HTS-420R Скачать руководство пользователя страница 56

Страница: 56 / 192

Total Station Manual

55 -

Applications

Prepare setting before measuring:

Before startingthe application, there are some preparations needed to set up.

The Pre-Settingsscreenwill beshown after the user selects an application. User can
select and set the content of the Pre-Settings menu successively.

[Surveying]

[*]  F1    Set Job             (1)
[ ]  F2    Set STA             (2)
[ ]  F3    Set B.S.            (3)
     F4    Start               (4)

[*]

：

Setting has been done.

[ ]

：

Setting has not been done.

The details of every setting are as follows.

Setting the Job

The measured data and fix data are saved in the jobs which are shown as

childdirectories. The job contains different types of data, such as fix points, measured

points, station points, codes, etc. The datas in the job can be read, edited and
deleted.

1.1

Create a new Job

Steps

Key

Display

○

Press

[F1]

the

Pre-Settings

screen.

Then

enter the Set Job function.

[F1]

[Surveying]

[*]  F1    Set Job             (1)
[ ]  F2    Set STA             (2)
[ ]  F3    Set B.S.            (3)
     F4    Start               (4)

Содержание HTS-420R

































































































































































































Результаты поиска

Содержание HTS-420R

Отзывы:

Бренды по названию

Популярные бренды

Hi-Target HTS-420R, Руководство пользователя

Результаты поиска

Содержание HTS-420R

Отзывы:

Бренды по названию

Популярные бренды