background image

Installation BN48-IP66 

2

 

                                                                                                                                    Release 01    11/2019     

 
 

The naming of copyrighted trademarks in this manual, even when not 
specially indicated, should not be taken to mean that these names may 
be considered as free in the sense of the trademark and tradename 
protection law and hence that they may be freely used by anyone. 
 
Manuals and software are protected by copyright. All rights reserved. 
The copying, reproduction, translation, conversion into any electronic 
medium or machine scannable form is not permitted, either in whole or in 
part. An exception is the preparation of a backup copy of the software for 
your own use. 
 
The performance features described here are binding only if they have 
been expressly agreed when the contract was made. This document 
was produced by Shanghai HITE-BELDEN Networking Technology Co., 
Ltd. (Hi-SCOM) according to the best of the company's knowledge. Hi-
SCOM reserves the right to change the contents of this document 
without prior notice. Hi-SCOM can give no guarantee in respect of the 
correctness or accuracy of the information in this document. 
 
Hi-SCOM can accept no responsibility for damages, resulting from the 
use of the network components or the associated operating software. In 
addition, we refer to the conditions of use specified in the license 
contract. 

 
 
 

 

Shanghai HITE-BELDEN Network Technology Co., Ltd. 
http://www.hi-scom.com/en 
 

 

 

Содержание BN48-IP66























Отзывы: