OPERATING INSTRUCTIONS:
Electric Torque Wrench
Series: TWE
TDS:-
1399
Prepared by:- M.DAVIES
Approved by:-
Date: 25/03/14
REV NO:-
1
ECO:-
Page
18
of
20
5.
MAINTENANCE AND REPAIR
The gear parts of the wrench are maintenance-free.
Repairs to the gears must be made by the manufacturer, as - after the exchange of parts - the accuracy of
the torque values must be checked and the wrench must be re-calibrated.
According to legal regulations, the wrench must be checked by a competent electrician at regular intervals
in order to safeguard the electrical safety.
Before use always check that the fixing bolts of the pivoting handles sit tightly, and that the handle itself
is intact.
After gears have been run in (approx. 1000 to 2000 bolts) and thereafter once a year, it is necessary to
check and possibly re-calibrate the torque wrench.
If a mains power lead is damaged, this must be replaced by Hi-Force, because special-purpose tools
are required.
Use only genuine Hi-Force accessories and genuine Hi-Force spare parts
.
6.
TOOL ILLUSTRATION
1)
Pistol Grip
2)
Torque Adjustment
3)
LED Display
4)
On/Off Switch
5)
Right/Left Switch
6)
Label
7)
Digital Display
8)
Gear Shift
9)
Planetary Gear
13) Reaction Arm
