iNSTALL
Designed and Engineered in the UK by HH Electronics LTD.
© 2020 HH Electronics Ltd
260mm
165 mm
10mm
175 mm
176 mm
235mm
REQUIRED CUTOUT
SPECIFICATION - TNi-C6
1 Measured in Full space (4π) conditions
2 Calculated maximum SPL based on rated power handling
3 AES standard, pink noise with 6 dB crest factor, free air.
MINIMUM REQUIRED
INSTALLATION DEPTH
6
In the interest of continued development, HH reserves the right to amend product specification without prior notification.
Model
TNi-C6
Woofer Size
6.5 inch
Woofer Cone Material
Polypropylene With Rubber Edge
Tweeter Size
1.5 inch Neodymium
100V Transformer Power Taps
40W, 20W, 10W
70V Transformer Power Taps
20W,10W, 5W
Low Impedance
8 ohm
Low Impedance Dynamic Power
100W RMS
Low Impedance RMS Power
50W RMS
SPL 1W/1m
90
Max SPL 1m
107 dB SPL
Frequency Response
75Hz > 20KHz
Input Connector
Push Spring Connectors
Dispersion Angle (1kHz)
180°
Applicable Low Impedance
Yes
Applicable In 100V
Yes
Enclosure
Outside Diameter
260mm, (10.2")
Depth
176mm, (6.9")
Cutout
235mm, (9.3")
Installation Grip Range
4-20mm
Main Construction Material
ABS Plastic
Grille Main Material
1.5mm Circular Mesh Steel
Finish
White
Mounting Points
4x Dog Ear Brackets
Unit weight
2.1Kg, 4.6 lbs
Single Carton dimensions (HWD)
200 x 260 x 260mm, (7.9" x 10.2" x 10.2")
Single Packed weight
2.7Kg, 6 lbs
EAN Code
5060109457032
Master Carton dimensions (HWD)
440 x 560 x 560mm, (17.3" x 22" x 22") (8pcs)
Master Packed weight
23Kg, 50.7 lbs
Master EAN Code
5060109457049
For polar plots, EASE modelling files, 2D and 3D drawings files, please check www.hhelectronics.com
CEILING INSTALLATION LOUDSPEAKER
