HH Electronics SCALAR SR Series, Руководство пользователя

Страница: 13 / 20

SR SERIES SETUP CONNECTIONS
Bridge Mode: In this mode, an input signal is connected to channel 1, set the mode switch to Bridge, connect a
speaker cabinet across the Bridge Binding Posts and adjust the CH1 gain control, usually set to full power and
then control the output from the signal source. See wiring diagrams for connectors.
Stereo Mode: In this mode, a different input signal can be connected to each channel, set the mode switch to
Stereo, connect a speaker cabinet to each channel output and adjust the two gain controls, usually set to full
power and then control the output from the signal source. See wiring diagrams for connectors.
Parallel Mode: In this mode, an input signal is connected to channel 1, set the mode switch to Parallel, connect a
speaker cabinet to each channel output and adjust the two gain controls, usually set to full power and then
control the output from the signal source. See wiring diagrams for connectors.
CH1 Input
CH1 Input
CH2 Input
CH1 Input