Warnings for product use
Warning
HGM’s Vivart lighting products use secured DC 48V power supplies.
Negligent use of the product, such as connecting common domestic (110/220V) AC power supply
without DC adapter (SMPS), will result in critical damage done to the product. Therefore, please, read
and keep in mind the inspection procedure and installation process details.
1. Warnings for installation and repair/ inspection of the product
• Do not disassemble the product by yourself, with no help from professional service agent.
This will cause damage to the product.
• In case the emitted light is switched off in unusual way, please, handle the product after turning off the
power.
• If splashed with water, please, use only after removing all water or moisture.
• While replacing artwork film or other parts, please, wear electrostatic gloves in order to keep the
LED units clean and the user safe.
•
Do not stare at LED light while replacing the film. The strong light can cause temporary blindness.
2. Checklist
• Each product has different data on power connector and adapter. During the installation, please,
check if the product has an appropriate voltage/power connector.
3. Proper installation and Operation test
• After installation, keep inside/outside of the product clean, inspect device’s power cord, frame’s hinged
cover and the film (whether it is bent). Then, complete installation.
