manualshive.com logo in svg

HGI Generators HRD270T1, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
HGI Generators HRD270T1 Скачать руководство пользователя страница 29

Harrington Generators International

24

HRD Diesel Generator 

498-1052

Operation

 

  

NOTICE

When generator not required switch off to minimise 
battery drain.

DSE4510 Control Module

The control panel has a Deep Sea Electronics 4510 
engine and generator management system which 
combines engine management, condition monitoring 
and general operational control of the machine. It is 
designed for ease of use and provides information 
via a large LCD display which is accessed through a 
simple scroll menu system.

               

Control Button Descriptions:

Item

Description

This button allows you to STOP the 
unit or reset any cleared alarms.

Selecting this button places the unit 
into AUTO mode and will automatically 
start when the mains fails or the unit 
receives a remote start signal.
Press this button to start the generator  
(Used in conjunction with the manual 
start control button)

Menu scroll keys up and down

The Deep Sea 4510 Engine Control module allows the 
user to control the operation of the generator engine. 
The Deep Sea 4510 also provides instrumentation for;

• Engine 

Speed

• Generator 

Voltage

• Generator 

Current

• Generator 

Frequency

• Engine 

Run 

Time

• Battery 

Volts

• Generator 

kW

• Generator 

kVA

• Alarm 

messages

Wiring diagrams for the Deep Sea 4510 and other 
panel wiring are included in this document.

The DSE module will go into standby when no com-
mon alarms have been triggered after 1 minute of 
inactivity. When the emergency stop is pressed in the 
DSE module will not go into standby, and will drain the 
battery.

Instrumentation

To access various instrumentation displays you will 
need to press the “up down” buttons on the engine 
control module. Each page of instrumentation can be 
accessed sequentially in this order.

• Engine 

speed

• 

Generator volts and Amps

• Generator 

frequency

• 

Engine run time

• Battery 

volts

If an alarm is raised while an instrumentation view is 
being displayed the instrumentation view is changed 
to the alarm page. The alarm page is only available 
when an alarm has been raised; also the default 
instrumentation view that is displayed is the engine 
speed page.

Indication

There are 3 indication LED’s (Light Emitting Diodes) 
on the front of the engine control module;

• 

The Started Mode Indicator

This LED is to the upper-right of the Start 

   

button and is illuminated when the engine is in the 
“Start” mode.

• 

The Automatic Mode Indicator 

This LED is to the upper-right of the Auto 

 

button and is illuminated when engine control 
module is in the “Auto” mode.

• 

The Common Alarm Indicator

This LED 

  is on the right side of the modules’ 

LCD (Liquid Crystal Display) and is illuminated 
when one of the common faults has occurred with 
the set.

Common Alarms

The common alarm indicator will be illuminated when 
there is a condition with the engine or alternator that 
requires the operator’s attention. When the common 

Содержание HRD270T1



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды