manualshive.com logo in svg

HGI Generators HRD270T1, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
HGI Generators HRD270T1 Скачать руководство пользователя страница 18

Harrington Generators International

13

HRD Diesel Generator 

                                 498-1052

Safety

Pt No 499-945-011

On side panel:

KEEP FLAMMABLE MATERIAL AWAY 
FROM THE GENERATOR

The exhaust and some surfaces are hot 
and 

fl

 ammable material should not be 

allowed near the generator.

Pt No 499-945-011

On side panel:

OPERATE ONLY IN WELL VENTILATED 
AREAS. EXHAUST FUMES CAN KILL.

Generally the generator will be installed 
outside. If the generator is to be installed 
inside a building please refer  to our 
separate Installation Guide 
An exhaust extension is normally 
supplied with each generator and 
should be used to duct the exhasut gas 
straight outside. Suf

fi

 cient air grilles for 

ventilation should be provided. For such 
applications consult the Technical Help 
Line.

Pt No 499-945-011

On side panel:

STOP ENGINE AND ALLOW TO COOL 
DOWN FOR A FEW MINUTES BEFORE 
REFUELLING.

In addition DO NOT SMOKE while 
refuelling, use a funnel or similar to 
prevent fuel spillage, avoid over 

fi

 lling the 

fuel tank and wipe up any spilt fuel. Avoid 
contact of fuel with skin. 

Pt No 499-945-011

On side panel:

DO NOT SPILL FUEL ONTO HOT 
SURFACES

The exhaust outlet and the area around it 
in particular are hot.

Pt No 499-945-011

On side panel:

DO NOT ADJUST THE SPEED OF THE 
ENGINE UNLESS YOU HAVE BEEN 
TRAINED TO DO SO

If the generator is not producing enough 
power for the application or you suspect 
a problem do not adjust the engine 
speed. This may damage the engine, 
alternator and any power equipment 
plugged into the generator.

Pt No 499-945-011

On side panel:

KEEP CHILDREN AT A SAFE 
DISTANCE FROM THE EQUIPMENT 
AND DO NOT ALLOW THEM TO 
OPERATE IT

This is a mandatory Health and Safety 
Requirement for this equipment. A 
version with a key switch is available if 
required.

Содержание HRD270T1



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды