HF-LPC3X0 Series Wi-Fi&BLE User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 12 -
1.1.2
Device Paremeters
Table1.
HF-LPC3X0 Series Module Technical Specifications
Class
Item
Parameters
Wi-Fi
Parameters
Certification
TBD
Wireless standard
802.11 b/g/n
Frequency range
2.412GHz-2.484GHz
Transmit Power
802.11b: +16 +/-2dBm (@11Mbps)
802.11g: +14 +/-2dBm (@54Mbps)
802.11n: +13 +/-2dBm (@HT20, MCS7)
Receiver Sensitivity
802.11b: -87 dBm (@11Mbps ,CCK)
802.11g: -73 dBm (@54Mbps, OFDM)
802.11n: -71 dBm (@HT20, MCS7)
BLE
Parameters
Certification
TBD
Wireless standard
BLE4.2
Frequency range
2.402GHz-2.480GHz
Transmit Power
Max 20dBm
Receiver Sensitivity
-90dBm
Hardware
Parameters
Antenna Option
Internal: PCB antenna
External: IPEX antenna
Data Interface
UART
GPIO, SPI, PWM, I2S, I2C, SDIO
Operating Voltage
3.0~3.6V
Operating Current
Peak (Continuous TX): 440mA
Average(STA, No data): 25mA
Average(STA, Continuous TX): 85mA
Average(AP): 110mA
Standby: 300uA(Reset Pin set to low)
Operating Temp.
-25
℃
- 85
℃
Storage Temp.
-40
℃
- 125
℃
Humidity
<85%
Dimensions and Size
HF-LPC300: 23.1mm x 32.8mm x 3.5mm
HF-LPC330: 22mm x 15.6mm x 8mm
Software
Parameters
Network Type
STA/AP/AP+STA
Security Mechanisms
WEP/WPA-PSK/WPA2-PSK
Encryption
WEP64/WEP128/TKIP/AES
Update Firmware
Local Wireless, Remote OTA
Customization
Support SDK for application develop
Network Protocol
IPv4, TCP/UDP/HTTP/TLS(SDK)
User Configuration
AT+instruction set. Android/ iOS
SmartAPLink AP Config
SmartBleLink BLE Config
1.2.
Hardware Introduction
HF-LPC3X0 series Wi-Fi module appearance is as following.