HF HF-LPC300, Руководство пользователя

Страница: 15 / 68

HF-LPC3X0 Series Wi-Fi&BLE User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 15 -
Pin Describtion Net Name Signal
Type
Comments
12 PWM5 I/O GPIO26, leave it open if not use
13 GPIO23 GPIO23 I/O GPIO23, leave it open if not use
14 GPIO22 GPIO22 I/O GPIO22, leave it open if not use
15 GPIO21 GPIO21 I/O GPIO21, leave it open if not use
16 GPIO20 GPIO20 I/O GPIO20, leave it open if not use
19 UART1 DEBUG_UART1_RX I 3.3V TTL Debug UART1 Input
leave it open if not use
21 UART1 DEBUG_UART1_TX O 3.3V TTL Debug UART1 Output
leave it open if not use
22 N.C
23 N.C
24 N.C
25 UART0 UART0_TX O 3.3V TTL UART0 Output
26 PWM1 PWM1 I/O GPIO7, leave it open if not use
27 UART0 UART0_RX I 3.3V TTL UART0 Input
28 PWM0 PWM0 I/O GPIO6, leave it open if not use
29 Wi-Fi Status nLink I/O
“0” – Wi-Fi connect to router
“1” – Wi-Fi unconncted;
Detailed functions see <Notes>
GPIO24, leave it open if not use
30 Module Boot Up
Indicator
nReady I/O
“0” – Boot-up OK;
“1” – Boot-up No OK;
GPIO8, leave it open if not use
31 Multi-Function nReload I/O Detailed functions see <Notes>
GPIO9, leave it open if not use
32 N.C
33 Module Reset RESET I,PU
“Low” effective reset input(>10ms).
There is RC reset circuit internally.
Leave it open if not use.
37 ANT ANT Antenna Pin, only for HF-
LPC300-2
HF-LPC300 module SOC chip integrate 2MB Flash, but it has additional postion for adding Flash,
the Flash postion is as following. This flash can be used for saving data using SDK.
Figure 4. HF-LPC300-1(8M) Flash