Figure 3 Nonport side view—8/40 SAN Switch
5. Fan (for power supply/fan FRU1)
1. Fan (for power supply/fan FRU2)
6. Power supply/fan status LED (for power supply/fan FRU
1)
2. Power supply/fan status LED (for power supply/fan
FRU2)
7. Power supply connector (for power supply/fan FRU 1)
3. Power supply connector (for power supply/fan FRU2)
8. Fan (for power supply/fan FRU1)
4. Fan (for power supply/fan FRU2)
Activating additional 8/40 SAN Switch ports
By default, the 8/40 SAN Switch model integrates 24 licensed ports (ports 0 through 23). To
enable additional ports, you must purchase and install the HPE Storage Works 8/40 SAN Switch
8-Gb 8-port Upgrade LTU (part number T5519A):
•
To enable ports 24 through 31, you must purchase and install one upgrade license.
•
To enable ports 32 through 40, you must purchase and install a second upgrade license.
See
Installing and activating Port Upgrade licenses (page 20)
.
8/80 SAN Switch features
•
Provides the EZSwitch Setup Wizard for easy setup and basic configuration.
•
Integrates 1, 2, 4, and 8 Gb/s autosensing Fibre Channel switch and router ports.
•
Includes a system motherboard that features a Freescale MPC8548 RISC CPU running at
1.3 GHz with integrated peripherals that provides high performance with low power
consumption.
•
Ships FICON and FICON Cascading ready. FICON CUP is available, but requires an optional
license.
•
Provides two hot-swappable, redundant power supply FRUs.
•
Provides three hot-swappable fan FRUs in an N+1 configuration to provide
hardware-redundant cooling.
•
Provides universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports.
EX_Ports are activated on a per-port basis with the optional HPE B-series 48-80 Port SAN
Switch Integrated Routing LTU.
This license provides native FCR on a per-port basis, rather than limiting routing ports to
those on a dedicated routing blade or switch. Just like traditional FCR, Integrated Routing
uses EX_Ports to import and export devices between fabrics, enabling selective device
sharing while maintaining remote fabric isolation.
•
Integrates a USB port that provides storage for firmware updates, output of the
supportsave
command, and storage for configuration uploads and downloads.
Port side of the 8/80 SAN Switch
The port side of the 8/80 SAN Switch includes the system status LED, console port, Ethernet
port and LEDs, USB port, and FC ports with corresponding port status LEDs.
shows the port side of the 8/80 SAN Switch.
8/80 SAN Switch features
11