Hewlett Packard Enterprise ProLiant DL360 Gen10 Plus, Руководство пользователя

Страница: 93 / 257

Installing Installing persistent memory modules persistent memory modules
Use this procedure only for new persistent memory module installations. If you are migrating this persistent memory module from
another server, see the Intel Optane persistent memory 200 series for HPE User Guide on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/persistentmemory-docs
https://www.hpe.com/info/persistentmemory-docs).
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
A T-10 Torx screwdriver might be needed to unlock the access panel.
Procedure Procedure
1. Observe the following alerts:
CAUTION: CAUTION:
DIMMs and persistent memory modules are keyed for proper alignment. Align notches on the DIMM or persistent
memory module with the corresponding notches in the slot before installing the component. Do not force the DIMM
or persistent memory module into the slot. When installed properly, not all DIMMs or persistent memory modules
will face in the same direction.
CAUTION: CAUTION:
Electrostatic discharge can damage electronic components. Be sure you are properly grounded before beginning
this procedure.
CAUTION: CAUTION:
Failure to properly handle persistent memory modules can damage the component and the system board connector.
IMPORTANT: IMPORTANT:
Hewlett Packard Enterprise recommends that you implement best-practice configurations such as clustered
configurations for high availability (HA).
2. Power down the server (Power down the server).
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack ( Extend the server from the rack ).
b. Remove the server from the rack ( Remove the server from the rack ).
5. Place the server on a flat, level work surface.
6. Remove the access panel.
7. Open the DIMM slot latches.
8. Install the persistent memory module.
Installing persistent memory modules 93