Hewlett Packard Enterprise HPE ProLiant DL345 Gen10 Plus, Руководство пользователя

Страница: 52 / 273

b. Using a browser, navigate to the iLO web interface, and then log in.
Note the following:
The iLO hostname is on the serial number/ iLO information pull tab.
If a DHCP server assigns the IP address, the IP address appears on the boot screen.
If a static IP address is assigned, use that IP address.
The default login credentials are on the serial number/ iLO information pull tab.
c. In the side navigation, click the Remote Console & Media link, and then launch a remote console.
Power on the Power on the server server
6. Press the Power On/Standby button.
For remote management, use the iLO virtual power button.
7. Using the SPP, update the following:
System ROM
Storage controller
Network controller
Intelligent Provisioning
Set up the storage Set up the storage
8. Set up the storage. Do one of the following:
To configure the server to boot from a SAN, see the following guide:
https://www.hpe.com/info/boot-from-san-config-guide
https://www.hpe.com/info/boot-from-san-config-guide
If an HPE storage controller option is installed:
For SR controllers, use the Smart Storage Administrator to create arrays:
a. From the boot screen, press F10 F10 to run Intelligent Provisioning.
b. From Intelligent Provisioning, run Smart Storage Administrator.
For more information on SR controller configuration, see one of the following guides:
HPE Smart Array SR Gen10 User Guide at https://www.hpe.com/support/SSC-SRGen10-ug https://www.hpe.com/support/SSC-SRGen10-ug
HPE SmartRAID SR Gen10 Plus Controller User Guide at https://www.hpe.com/info/SmartRAID-Gen10Plus-UG https://www.hpe.com/info/SmartRAID-Gen10Plus-UG
For MR controllers, use the UEFI Storage Configuration Utility to create arrays. Intelligent Provisioning and Smart Storage
Administrator does not support MR controller configuration.
IMPORTANT: IMPORTANT: Before you install an OS on drives connected to an MR controller, configure the drives using
UEFI System Utilities (F9). If the drives are not configured, the OS will not detect the drives during
installation.
a. From the boot screen, press F9 F9 to enter UEFI System Utilities.
b. From the UEFI System Utilities screen, select System Configurations > controller name > Array Configuration > Create
Array.
For more information on MR controller configuration, see the HPE MegaRAID MR Gen10 Plus Controller User Guide at
https://www.hpe.com/info/MegaRAID-Gen10Plus-UG
https://www.hpe.com/info/MegaRAID-Gen10Plus-UG.
If no controller option is installed, do one of the following:
AHCI is enabled by default. You can deploy an OS or virtualization software.
Disable AHCI, enable software RAID, and then create an array.
For more information, see the HPE SR Gen10 Plus Software RAID User Guide at https://www.hpe.com/support/SSC-
https://www.hpe.com/support/SSC-
SRGen10Plus-ug SRGen10Plus-ug.
Deploy an OS or virtualization software Deploy an OS or virtualization software
https://<iLO hostname or IP address>
-
-
Setting up the server 52