4
|
HEWI
345
345
345
448
448
448
ø 33
ø 33
ø 33
450-850
450-850
450-850
550-850
550-850
550-850
Purpose
The HEWI suspended seat is a seat for people with and without physical
disabilities. The HEWI suspended seat is designed for a maximum vertical
static load of 150 kg.
Mounting information
The following points must be observed:
• The suspended seat is suspended from the appropriate HEWI handrail
(dia. 33 mm) from above. The support separation must not exceed
max. 850 mm (horizontal bar).
• Ensure that the wall structure and the handrail fittings are able to
permanently withstand the anticipated load. Lightweight wall
constructions must have a suitable supporting framework.
Warning and hazard notices
• Improper mounting or use can lead to accidents involving serious injuries.
• Do not misuse the suspended seat, e.g. as a climbing aid.
• A certain vertical incline is normal when the seat is under load. In the
event of damage, the suspended seat may only continue to be used
following inspection by a specialist company.
Care and cleaning instructions
HEWI products are easy-care. Generally speaking, an occasional wipe
with a damp cloth is enough. When using detergents, please observe
the following:
• Only use detergents with a pH of between 6 and 8.
• Detergents containing active substances such as phosphates,
soap and tensides may be used.
• Follow the detergent manufacturer’s instructions (concentration,
contact time).
• Detergents containing acids, alkalis, bleach or scouring agents
may not be used.
• Do not use scouring cleaning equipment, such as brushes
Exclusion of liability
HEWI accepts no liability whatsoever for damage to persons or property
that occurs or has occurred as a result of improper mounting or main-
tenance, particularly if the safety instructions and other points to note
listed are not or have not been observed in full. HEWI accepts no liability
whatsoever for damage occurring from incorrect cleaning.
For further information, please contact HEWI Technical Support,
tel. +44 1634 377688.
Important information
M8010-04.indd 4
04.03.13 15:34
