Heta Scan-Line Tour 10, Инструкции по эксплуатации и монтажу

Страница: 9 / 24

9
conditions. In high winds, the draft can become
so powerful that it may be necessary to fit a
damper in the flue gas pipe to regulate the draft.
When cleaning the chimney, soot and other
deposits may come to fall on the baffle plate,
remove and clean it. In cases where the wood
burns too quickly, this may be due to excessive
chimney draft. You should also check to make
sure that the door seal and ash pan seal is intact
and correctly fitting.
If the stove it generating too little heat, this may
be because you are firing with wet wood. In this
case, much of the heating energy is used to dry
the wood, resulting in poor efficiency, poten-
tially damaging the vermiculite and an increased
risk of soot deposits in the chimney.
1.12 Chimney fire
In case of a chimney fire, which often results from
incorrect operation/maintenance or prolonged
use of damp wood, close the door and the air
supply completely, to help slow/smother the fire.
Call the fire department. The stove and chimi-
ney must be inspected before use again.
1.13 Maintenance
The surface of the stove is treated with a heat-
resistant paint. The stove should be cleaned
with a damp cloth.
Any damage to the surface in the form of chips
or scratches can be repaired using touch-up
paint, which is available in spray cans.
1.14 Cleaning the glass
Incorrect firing, for example using wet wood,
can result in the viewing window becoming
covered in soot. This soot can be easily and
effectively removed by using proprietary stove
glass cleaner.
1.15
Cleaning ceramic surfaces
The ceramics have a glazed surface and can
be wiped with a damp cloth
1.16 Diagram for the maintenance
Stove Owner
Qualified
Technicia
Maintenance / Period Before
Autum
Daily
1
week 30
days 60-90
days 1st Year 2st Year
Cleaning the chimney (see. Chimney)
C
Cleaning the chimney and stove
C C
Cleaning the stoves firebox
C VI C
Cleaning combustion air intake
C C
Cleaning ash bucket
C VI C
Cleaning of the firebox
C VI C
Checking / switch, gasket for door
C/S VI C/S
Checking / changing, gasket for glass
C/S VI C/S
Checking / switch, gasket for ashpan
C/S VI C/S
Checking / changing gasket for flue pipe
C/S VI C/S
Checking / changing vermiculite
C/S VI C/S
Lubricate hinges
L VI L
Lubricate lock
L VI L
Lubricate Ash pan
L L
C = Cleaning C/S = Checking /Switch
L = Lubricate VI = Visual Inspection, pos. cleaning/replacing/adjusting