15
Assembly, Operation & Maintenance Instructions
STEP 04
/ Take the two bottom shelf supports (06) and fit them onto the cylindrical tabs at the
inside of each foot. Rotate each one so that the outmost screw holes are facing inwards
and the inner screw holes are facing the stand top (if not, pull out and fit in the opposite
way). Fix in place with four M6x12mm screws (A) and spring washers (D). When all are
assembled, tighten up all four screws and the screws from step 02.
STEP 05
/There are two threaded holes at the inside of the right hand legs. Take the support chain
(13) and fix it to the two legs with two M6x12mm screws (A). Tighten fully.
STEP 06
/ Turn the stand onto its legs and check that all of the legs are stable. Take the plastic
bottom shelf (07) and place it on the two bottom shelf supports. Line the four holes in
the bottom shelf up with the threaded holes in the bottom tray supports and fix into
position using four M5x12mm screws (B) and four spring washers (C). Tighten fully.
