12
Assembly, Operation & Maintenance Instructions
Cylinder valve is not on
Turn cylinder valve on.
Cylinder is empty
Replace with a full cylinder/bottle.
Igniter is not sparking
Remove grill/plate and visually check ignition box for a spark. Check that the cables to the ignition point, or from the valve to the chassis, have not
broken or disconnected. Also check the alignment of the sparker. If there is no spark, contact service provider.
Injector is blocked
Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact service provider.
TROUBLESHOOTING
Burner will not ignite when using the igniter:
Burner flame is erratic:
Gas is leaking from connections:
Burner is blocked
Remove cooking surface and check burner for obstruction. Clean ports.
Flame is burning inside
burner (hissing sound)
Turn off burner, allow to cool and re-ignite as per instructions.
Regulator is faulty
Contact service provider.
Injector is partially blocked
Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact service provider.
Connections are loose
Tighten loose connections (do not over-tighten) and leak test under pressure with soapy water solution (page 7).
Hose has deteriorated
Contact service provider - replace.
Gas valve is faulty
Contact service provider.
Threads are damaged
Contact service provider.
