13
Assembly, Operation & Maintenance Instructions
BARBEQUE AND STAND ASSEMBLY
The barbeque and hood come fully assembled. To assemble, the stand must first be built (note: for transportation reasons, the barbeque is packaged bolted to the stand top, and
should be removed before attempting to assemble the stand). The barbeque is placed back inside the stand after it has been assembled and re-attached (it can be removed to
cook from a raised bench). Only a medium size Philips screwdriver is needed.
Open the carton from the top and remove the parts. Remove all packaging (especially check inside the barbeque chassis) and place parts on a clean surface. Check for any
damage or missing parts (if found, contact your service provider).
INCLUDED PARTS FORCE
TM
AND FURNACE
TM
PACKAGING
Remove all internal cartons and packaging from within the barbeque/hood assembly. Remove all external packaging and remove the appliance from the packaging base before
operation. Recycle as per your local government laws.
01/ Hood, barbeque
chassis and 01B stand
top assembly x 1Pc
09 / Cast iron middle
grill x 1Pc
(FURNACE model only)
02 / Left front leg
x 1Pc
10/ Cast iron grill x 2Pcs
(FURNACE model only)
03 / Left back leg
x 1Pc
11 / Fat tray x 1Pc
04 / Right front leg
x 1Pc
05 / Right back leg
x 1Pc
06 / Bottom shelf
support x 2Pcs
12 / Cylinder hook
x 1Pc
07 / Bottom shelf
x 1Pc
13 / Gas cylinder support
chain x1Pc
08 / Cast iron grill x 2Pcs
(FORCE model only)
A / Bolt M6 x 12
x 11Pcs
B / Bolt M5 x 12
x 4Pcs
H / Nut M6
x 1Pc
D / Spring washer Ø6
x 5Pcs
E / Flat washer Ø6
x 4Pcs
14/ Hood Handle
x 1Pc
F / Bolt M5 x 15
x 2Pcs
G / Flat washer Ø5
x 2Pcs
C / Spring washer Ø5
x 6Pcs
