hestan KEC 30, Руководство по установке

Страница: 6 / 28

©2018 Hestan Commercial Corporation
4
EN
D
G
C
E
F
13” [33 cm]
Depth of
unprotected
overhead
cabinets
2” [5 cm] min
Clearance
from cutout to
side wall on
the left and
right of the
unit
30” [76.2 cm]
min.
[see note*]
Clearance
from
countertop to
unprotected
overhead
surface
18” [45.7 cm]
min
Height from
countertop
to nearest
cabinet on
either side of
unit
A B C D E F G
30”
[76.2 cm] min
36”
[91.4 cm] min
19-1/4”
[49.0 cm]
19-5/8”
[49.8 cm]
19-1/4”
[49.0 cm]
19-5/8”
[49.8 cm]
28-11/16”
[72.9 cm]
28 15/16”
[73.5 cm]
34-1/16”
[86.5 cm]
34-5/16”
[87.2 cm]
CUTOUT
WIDTH
30”
[76.2cm]
36”
[91.4 cm]
Figure 3. Cutout dimensions and requirements
Under the cooktop it is necessary to install a partition
as shown ****
IMPORTANT
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to insure
smooth edges and prevent corner cracking.
Recommend 1/4“or 3/8“diameter drill in each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
This cooktop has been designed with wide
tolerances of cut-out for when another brand is
being replaced with a Hestan unit. For new
installations, we recommend holding to the
minimum cutout dimensions.
* NOTE
24” [61 cm] min. clearance if bottom of wood or metal
cabinets is protected by not less than 1/4” [0.6 cm] flame
retardant millboard covered with no less than No. 28 MSG
sheet steel 0.015” [0.04 cm] stainless steel, or 0.024” [0.06
cm] aluminum or 0.020” [0.05 cm] copper.
30”[76.2 cm] min. clearance between top of cooking platform
and bottom of unprotected wood or metal cabinet
Dim . Inches cm
28-15/16” x 19-9/16” 73.5 x 49.7
34-5/16” x 19-9/16” 87.2 x 49.7
• 30”
• 36”
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200°F [93°C]
CUTOUT REQUIREMENTS
CUTOUT DIMENSIONS AND REQUIREMENTS
(CONT.)