Herz firematic CONDENSATION 30, Руководство по эксплуатации

Страница: 40 / 92

9 T-CONTROL
40
Term Description Unit
Overview Operation
modes
Selection operation modes:
▪
Heating OFF
The heating system is switched off
▪
Heating time mode:
Heating corresponds to the set heating time
▪
Durable heat:
Constant heat up to required set room temperature or to the
calculated feed flow target temperature
▪
Durable kneeling:
Always heat to the kneeling temperature or during the kneeling time
to the calculated flow must temperature
▪
Remote control mode:
Mode according to the setting of the remote control
Menu "Status"
Status 1 1
2
Flow temperature Indicates the flow temperature of chosen heating circuit °C
Back flow temperature Indicates the back flow temperature of chosen heating circuit °C
Outside temperature Display of the actual outside temperature °C
Room temperature Setting up required room temperature (15-30). °C
Room correction
The correction is a factor for influencing or correction of the flow must
temperature:
This value (-5 to +5) gets multiplied by 2 and added to the flow set
temperature
°C
Status 2
1
2
Switching temperature
Indicates the switching temperature (= average daytime temperature). In
general the switching temperature conduces to switch between winter set
temperature and summer set temperature.
°C
Heating circuit mixer Indicates the state of the heating circuit mixer (OPEN/CLOSE) -
Heating circuit pump Indicates the state of the heating circuit pump (ON/OFF) -
Screed days
Display of the respective screed day (only if screed drying is set) -
Menu "Settings"
Settings 1 1
2 3
Operation modes
▪
OFF : The heating system is switched off
▪
Heating time mode : Heating corresponds to the set heating time
▪
Durable heat : Constant heat up to required set room temperature or to
the calculated feed flow target temperature.
▪
Durable kneeling : Always heat to the kneeling temperature or during
the kneeling time to the calculated flow must temperature.
▪
Flow fixed : During the set heating times the set flow fixed temperature
is kept constant.
▪
Remote control : Mode according to the setting of the remote control.
▪
Screed drying : Mode of screed drying. The operation of the screed
drying is described below
-