TW-810T
12
7.How to Use the transmitter
①
Turn ON the power switch of the receiver.
Make sure the receiving LED is OFF.
When the receiving LED lights up, the transmitter is not paired. Pair the receiver and transmitter.
②
A wireless signal is transmitted by turning the limit switch ON.
When wireless communication is normally executed, the receiver generates a relay output and the buzzer of the
receiver is activated according to the settings.
The green LED of the transmitter blinks once.
When the communication is not executed normally, the receiver is not activated.
The red LED of the transmitter blinks 10 times.
While the receiver is generating a relay output or preventing a double count, the receiver returns a BUSY signal
to the transmitter. Upon receiving the BUSY signal, the green LED of the transmitter blinks 4 times.
Transmitter
Receiver
Communication OK
Green LED blinks 1 time
Receiving LED blinks 1 time
Communication Failed
Red LED blinks 10 times
－
BUSY
Green LED blinks 4 times
－
The buzzer sounding time of the receiver is normally 100 msec. Only when the relay output time is set to 50
msec. and the double count prevention time is set to 10 msec., the buzzer sounding time is 50 msec.
*When an unpaired the transmitter transmits a signal, the red LED blinks 3 times.
Receiving LED (Green)
(Lighting switch for paring)
Monitor LED (green/red/yellow/orange)
