TW-810T
10
<Input Judgment time for transmitter>
The transmitter is designed not to transmit signals when the signal input time from the limit switch is 40ms or
less.
This prevents the transmitter from accidentally transmitting signals when dropping the torque wrench.
Due to the above mechanism, the transmitter may not transmit signals even after hitting the limit switch with
your finger, etc. for transmitting test signals.
<
Insertion or removal of the battery>
To close the battery cap, turn the battery cap securely in the direction of arrow shown below until it snaps into
place.
To remove the battery cap, turn the battery cap in the opposite direction from the arrow shown below.
When replacing the battery, be sure to insert the coin battery with the correct polarity.
Battery cap
Coin battery (CR 2032)
