
Operating Instructions
95950001
29
EN
13. TROUBLESHOOTING
Problem
Possible cause
Solution
Connected
-LED is not on.
The battery is not connected
correctly.
Battery voltage is at zero volts.
Check for proper connection to
the battery.
Turn off everything in the car
and try to connect again.
Charging
-LED is blinking.
Charger is in abort mode.
Battery is sulfated.
Battery is bad.
Unplug the charger from the
AC and plug it back in.
Have the battery checked.
Have the battery checked.
Full charge LED
is on, but bat-
tery is not fully.
Surface charge voltage is high.
Battery voltage is very low and
the charger detects it as 6V,
not 12V.
Replace the battery.
Unplug the charger from the
AC and plug it back in.
All LEDs are lit in an erratic
manner.
A button may have been
pressed while the charger was
being plugged in.
Unplug the charger from the
AC and plug it back in, without
touching the control board.