82
EN
II. Technical specifications
Model number/part number
8896351
HIGH-PRESSURE WASHER
Water connection requirements (clean water supply)
Supply water pressure range
Min. 1.4 bar – Max. 7 bar (140 – 700 kPa)
Minimum water supply flow rate
8.5 L/min
Min. and max. water temperature
Min. ≥ 2 °C (without ice); Max. 50 °C
Water supply hose connection method
Brass hose adapter G¾" × 20 mm;
seal the threaded connection using
Teflon tape or Teflon thread (not hemp)
Self-draw water from a container function
NO
Gasket seal with strainer in water connection
¾" Gasket seal with strainer intended
for water tap cap nuts
Pressurised water outflow parameters
Max. water pressure at the outlet
186 bar (18.6 MPa)
Water flow rate at the outlet
7.9 L/min (nominal)
8.3 L/min (maximum)
Water spray angle
0° (water beam)
15°; 25°; 40° fan - based on used nozzle
and a low-pressure shampoo nozzle (SOAP)
PRESSURE HOSE
1)
Length of pressure hose
10 m
Max. water temperature and pressure for hose
60°C; 22.0 MPa (220 bar)
SPRAY GUN
1)
Max. water flow rate:
25 L/min
Max. water temperature and pressure
60°C; 24.8 MPa (248 bar)
ENGINE OF THE PRESSURE WASHER
Type of engine
spark-ignited (petrol-powered), four-stroke,
single-cylinder with OHV valve gear
Fuel type
Lead-free 95 or 98 (Natural) without oil
Oil type for engine crankcase
motor SAE 15W40
Oil volume for engine crankcase
approx. 440 ml
Cooling
air-cooled
Starting
manual - using a pull starter
Nominal/Max. engine power
Rated 3.4 kW/Max. 3.8 kW/3600 min
-1
Cylinder displacement
196 cm
3
Spark plug
LG F7RTC or its equivalent
Fuel tank capacity
3.6 l
Operating time per full tank (3.6 l)
2 h with non-stop load (spraying)
Sensor detecting the low oil level in the engine
YES
Air filter
folded paper type
with PU foam pre-filter
Part no. 8896351C
Table 1
Содержание 8896351
Страница 99: ......