HERKULES GW/R-2-T, Руководство пользователя

Страница: 7 / 19

Operation
Additional Washing Features of Model
GW/R-3-T
Internal Washing of Paint Lines
Remove the brass plugs from the bottom of the 3-way valve
and the internal wash bulkhead (see Fig. 3 & 4). Install
a female fluid quick coupler with 1/4 in. npt male threads
(suitable for lacquer thinner) into the bottom of the 3-way
valve. Install a female fluid quick coupler with 3/8 in. npt
male threads (suitable for lacquer thinner) into the internal
wash bulkhead. Connect the paint line to the couplers.
Face the pointer of the 3-way valve down and operate the
gun washer.
Figure 4
01981002(105)
Washing Five Gallon Cans
Insert the spray nozzle assembly, hanging on the back
of the manifold, into the Q.D. coupler in the center of
the manifold (See figure 5). Place five gallon can over
spray nozzle.
Operate gun washer.
Figure 3
01981004(104)
Internal Washing of Paint Lines with Guns Attached
Remove the brass hex plug from the bottom of the 3-way valve.
Install a female fluid quick coupler with 1/4 in. npt male
threads (suitable for lacquer thinner). Connect paint line
with gun attached, to the coupler. Face the pointer of the
3-way valve down and operate the gun washer. To “bleed”
the paint (into a container) hold the trigger of the gun open
until clean thinner begins to flow.
Washing Pressure Pot and Lid
Insert the spray nozzle assembly, hanging on the back of the
manifold, into the Q.D. coupler in the center of the manifold
Figure 5
01981002(98)
(See figure 6). Place pot over spray nozzle. Place pickup tube
of lid over one of the short stem supports (remove gauges).
Operate gun washer.
Socket plug
#61A
Internal wash
bulkhead
3-way valve
pointer
Hex plug
Spray nozzle
assembly
Q.D. Coupler
Page 7 of 19